 |
| Range/Land Rover Stainless Steel Exhaust Manifold Dimensions |
|
 |
|
|
This may be, Just what you have been waiting for, .. perhaps !!.
The manifolds that come as Std. on the new shape Range Rovers, can make excellent Headers for many 'kit' cars and 'Conversion' cars,
We have a limited quantity in stock and they are stainless steel, & polish up superbly or just, do a great job as they are,
. |
| |
 |
'Driver side' UK. 'Passenger side', EU. & USA etc.
Stainless Steel Tubular manifolds
Shown here with the Std. Rover heat shield attached, this would however not be required with most applications.
The sizes shown are;-
Length 590 MM.
Height to flange 310 MM.
Width (widest point) 100 MM. |
| |
|
| |
|
'Passenger side', UK. 'Drivers side', EU. & USA. etc.
Stainless Steel Tubular manifolds
Shown here with the Std. Rover heat shield attached, this would however not be required with most applications.
The sizes shown are;-
Length 510 MM.
Height to flange 260. MM.
Width (widest point) 120. MM. |
 |
If required, we would recommend you also purchase the exhaust manifold stud kit set. And approprate gaskets to effect complete installation parts requirement.
It is of course, your own issue with fabrication the approrparate down pipes and remaining system, this would not be something we could help with, other than suppling additionally the approrpate down pipe gaskets.
Here you can see the 5.2 Litre V8 Rpi Engine.
Showing the Carbon Fibre intake system & the 'Stainless Steel Headers',
We don't supply them polished like this for the price, but can undertake to do it for you if needed. The cost of the manifolds only, would be.
(Currently unavailable)
|
|
Prices do not include local EU.Tax.(VAT).
Prices & stock are subject to change without notice. Information and advice, as always, is free.
|
|
|
|
